Last updated: November 2026

Six showcase lighting layouts that answer the questions our sales desk actually receives: how many heads a standard jewellery counter needs, what a tall wall case takes, how a watch cabinet differs from an eyewear wall, and what a museum table case is allowed to receive.

Every number below is produced by the same arithmetic as our public showcase lighting calculator: the head and beam angle are chosen to hit the merchandise target in the light pool, the pitch is set so no dark band appears between heads, and the driver is sized at 80% of its rating. They are first-pass estimates for cabinet makers and designers — not a photometric simulation, and not a substitute for a sample mock-up. If your cabinet differs, open the calculator with the prefilled link on each card.

Jewellery counter — diamonds & white metals

The counter most enquiries start from: a 120 cm glass counter, two glass shelves, stones on risers.

Cabinet (W × D × H)120 × 45 × 120 cm
Lit levels3 (glass shelves + top)
Suggested headCHIB7518-P-3W — 3 W magnetic track spotlight, OSRAM chip, CRI 90
Beam angle45°
Throw per level28 cm · pool 23 cm wide
Layout7 heads per level — 7 columns × 1 row, pitch ~17 cm
Total fixtures21 heads per case
Illuminance2,556 lux in the pool (2,200 target — dim to about 86% of full output)
Colour temperature4000K
Total load63 W
Driver, minimum100 W

Jewellery wall case — gold & coloured stones

A tall wall unit: four glass shelves, warmer 3000K so gold and amber stones keep their saturation.

Cabinet (W × D × H)100 × 40 × 200 cm
Lit levels5 (glass shelves + top)
Suggested headCHIB7523-P-3W — 3 W zoomable, 10°–60° adjustable on site
Beam angle60°
Throw per level28 cm · pool 32 cm wide
Layout4 heads per level — 4 columns × 1 row, pitch ~25 cm
Total fixtures20 heads per case
Illuminance1,842 lux in the pool (1,500 target — dim to about 81% of full output)
Colour temperature3000K
Total load60 W
Driver, minimum75 W

Watch cabinet — dials & winders

Dials are the product: a tight pool across the crystal beats an even wash that glares back at the viewer.

Cabinet (W × D × H)90 × 45 × 150 cm
Lit levels4 (glass shelves + top)
Suggested headCHIB7523-P-3W — 3 W zoomable, 10°–60° adjustable on site
Beam angle60°
Throw per level26 cm · pool 29 cm wide
Layout4 heads per level — 4 columns × 1 row, pitch ~22 cm
Total fixtures16 heads per case
Illuminance2,220 lux in the pool (1,500 target — dim to about 68% of full output)
Colour temperature3000K
Total load48 W
Driver, minimum60 W

Eyewear wall — frames on tiers

Four tiers of frames on a long wall: narrow depth means the beam must land before it hits the customer’s eye.

Cabinet (W × D × H)180 × 35 × 180 cm
Lit levels5 (glass shelves + top)
Suggested headCHIB7523-P-3W — 3 W zoomable, 10°–60° adjustable on site
Beam angle60°
Throw per level24 cm · pool 28 cm wide
Layout8 heads per level — 8 columns × 1 row, pitch ~22 cm
Total fixtures40 heads per case
Illuminance2,507 lux in the pool (1,100 target — dim to about 44% of full output)
Colour temperature4000K
Total load120 W
Driver, minimum150 W

Collectibles cabinet — figures & statues

Sealed cabinets trap heat: more small heads beat one hot one, with the driver outside the display volume.

Cabinet (W × D × H)60 × 40 × 160 cm
Lit levels4 (glass shelves + top)
Suggested headCHIB7523-P-3W — 3 W zoomable, 10°–60° adjustable on site
Beam angle60°
Throw per level28 cm · pool 32 cm wide
Layout3 heads per level — 3 columns × 1 row, pitch ~20 cm
Total fixtures12 heads per case
Illuminance1,842 lux in the pool (750 target — dim to about 41% of full output)
Colour temperature4000K
Total load36 W
Driver, minimum60 W

Museum table case — medium-sensitivity objects

180 lux is an exposure ceiling, not a preference: the layout dims to the conservator’s budget and UV stays out.

Cabinet (W × D × H)100 × 50 × 100 cm
Lit levels1 (top only)
Suggested headCHIB7518-P-3W — 3 W magnetic track spotlight, OSRAM chip, CRI 90
Beam angle25°
Throw per level88 cm · pool 39 cm wide
Layout4 heads per level — 4 columns × 1 row, pitch ~25 cm
Total fixtures4 heads per case
Illuminance903 lux in the pool (180 target — dim to about 20% of full output)
Colour temperature3000K
Total load12 W
Driver, minimum15 W

All layouts assume OSRAM-chip heads at CRI 90+, DC12V track, and drivers rated at 80% of their nominal output. Quantities scale linearly with the number of identical cases. For deeper cases, taller ceilings or dim-to-warm requirements, run your dimensions through the calculator or send us the cabinet drawings — we reply with a fixture list and driver schedule within one business day (MOQ 1 pc, samples in about 3 days).

Frequently asked questions

How many lights does a 120 cm jewellery showcase need?

For a 120 × 45 × 120 cm counter with two glass shelves and diamond-level targets, the calculator lands on 21 heads — 7 per lit level at 45°, throw 28 cm, about 2,556 lux in the pool dimmed to roughly 86%, on a 100 W driver for 63 W of load.

What beam angle is best for display case lighting?

The one whose light pool covers the merchandise at the real throw distance without spilling onto the case walls. At 25–30 cm of throw that is usually 45–60° for shelves of small items, and 15–25° for single feature objects. The calculator picks the angle mathematically; the layouts above show the result per cabinet type.

How many lux for jewellery versus museum objects?

Jewellery display runs bright: about 2,200 lux in the pool for diamonds and white metals, 1,500 lux for gold, 700 lux for pearls, amber and opal. Museum objects follow conservation budgets instead — 50 lux for highly sensitive material, 150–200 lux for medium sensitivity — and those are exposure ceilings, not design preferences. Details in our conservation lighting guide.

Related guides

Send Us a Message

Customize your own lamp

Get A Free Consultation And Estimate