Miniature LED Spotlights: Enhance Your Display

Table of Contents

Magnetic track light series

What miniature LED spotlights do that full-size heads cannot

A display case gives you 60–120 mm of headroom above the product and a frame that is usually 20–40 mm deep. A 7 W showcase spotlight needs more room than that. Miniature spotlights in the 1–3 W range are built for this gap: a 25–35 mm body, a remote driver, and a beam that reaches the product without the housing showing in the customer’s eyeline.

The practical difference is not brightness. It is control. Because the head sits close to the object, a narrow beam stays narrow — an 8–15° optic puts a defined pool of light on one ring or one watch without spilling onto the shelf label next to it.

Three settings that decide the result

  • Beam angle. 8–15° for a single piece, a ring or a dial. 24–36° for a shelf run where several items share one head. Mixing the two in one case is what makes a display look unplanned.
  • Colour temperature. 3000 K keeps gold, leather and warm-toned wood looking as they do in daylight. 4000 K is the usual choice for diamonds, silver and eyewear, where a cooler white reads as cleaner. One temperature per case — a single mismatched head reads as a fault, not a feature.
  • CRI. 90+ is the working minimum for coloured goods. Below that, reds and greens drift and gemstones lose saturation under the glass.
Miniature magnetic track spotlight mounted inside a display case
CHIB7515-P 1 W miniature magnetic track spotlight — 25 mm body, remote driver, 8–36° optics.

How many heads, and how much power

Count heads by focal point, not by case width: one head per piece you want to separate, plus one per 300–400 mm of continuous shelf for a wash. Then check the load. Miniature heads draw 1–3 W each, and the driver should not run above about 80% of its rating — a 60 W driver comfortably carries fifteen 3 W heads, not twenty.

If you already know the case dimensions and what goes inside, the showcase lighting calculator returns head count, total wattage and a driver recommendation in one step. For the wiring side, the driver selection guide covers 12 V versus 24 V and dimming compatibility.

Mounting inside a cabinet

Three options cover most cases: a recessed magnetic track in the case frame (invisible, adjustable, the usual choice for glass cabinets), a flush-mount head fixed to the underside of a shelf, or a pole spotlight where there is no track and the case has a solid back panel. All three use the same remote driver, so a mixed installation still runs from one power supply.

The fixtures in this family are listed on the product catalogue page; two common starting points are the 3 W flush-mount magnetic track light and the CHIA2411 1 W mini pole spotlight. Send case dimensions and a photo and we reply with a fixture list, beam angles and wattage — MOQ 1 pc, samples in about 3 days.

Related guides

If you are specifying the hardware as well as the light, our Full product catalogue page covers the fixtures in this family, and our jewelry display lighting guide covers beam angle, colour temperature and CRI for this application.

See the full catalogue or request a quote.

Buying fixtures to this specification? We manufacture showcase spots, magnetic track and pole lights to order — OEM & custom manufacturing explains what can be customised, and MOQ, lead time & sample policy covers minimums, samples and production schedules. Start from a matching fixture.

Facebook
Twitter
LinkedIn
WhatsApp
Picture of Wally
Wally

Hello friends! I'm the author of the post, with 15 years in the lighting industry.

Magnetic track light series
Get Free Quote

Leave a Reply

Your email address will not be published. Required fields are marked *

Send Us a Message

Customize your own lamp

Get A Free Consultation And Estimate